The Ring Doorbell won’t connect to WiFi is a frequent problem consumers have while setting up the Ring Camera. 

1. Lackluster signal strength, improper WiFi credentials, or network incompatibilities are some of the causes of this issue. 

2. First, verify the signal strength where the Ring Doorbell is situated to make sure your WiFi signal is strong enough. 

3. Use a WiFi extension or move your router closer if the signal is poor. 

4. Next, confirm that the WiFi password you entered during ring camera setup is accurate. 

5. The gadget may not connect due to a simple misspelling. 

6. Additionally, as many Ring devices do not function on 5GHz networks, make sure your router supports the 2.4GHz frequency.

7. Connectivity problems are frequently fixed by restarting the Ring doorbell and your router.

8. Make that the Ring Camera is in setup mode, which is indicated by a spinning white light on the doorbell, before beginning the setup process. 

9. Holding down the setup button for 15 seconds will reset ring doorbell ; if the issue still exists, repeat the procedure. 

10. As mismatched networks might make the setting procedure more difficult, make sure your smartphone is on the same network as the Ring doorbell. 

11. Finally, to enable the Ring Doorbell to connect, you may need to change firewall settings or update the firmware on your network. 

12. If none of these solutions work, contacting our experts might offer specialized help for your particular problem.

Visit our website to know more.